LogoLogo
Hub HomeDownloadsDocumentationReleases
  • Welcome
  • Introduction to HOLOPLOT
    • HOLOPLOT unique capabilities
    • HOLOPLOT technology
    • HOLOPLOT OS
      • Audio signal flow
    • Product family
  • user guides
    • HOLOPLOT system design
      • System design best practices
        • Introduction to sound system design
        • Which HOLOPLOT product is best suited to the application?
        • How do I decide on the position of my arrays?
        • What should be the size and aspect ratio of my arrays?
      • Beam design best practices
        • What are the fundamental principles of designing with beams?
        • How do I set up my coverage zones and what impact does that have on my design?
        • What are the different beam parameters and how do I apply them in my design?
        • How do I apply those beams in real world applications?
    • HOLOPLOT system deployment
      • Integration overview
      • Unboxing
      • Networking overview
      • AES67 Quick start guide
      • Advanced Network Configuration Tips
      • Power
      • Rigging
        • X1 Rigging Components
        • X1 standard rigging side plate attachment guide
        • X1 Standard rigging lifting procedures
        • X1 custom rigging
      • Venue validation
      • System operation & monitoring
      • Pairing the arrays & routing audio
      • Align and tune beams
      • Measurement and system optimization
    • Troubleshooting
  • HOLOPLOT Plan
    • Getting started
      • Recommended specifications
      • Installing HOLOPLOT Plan
      • Additional 3rd party tools
      • Navigating the interface
    • Onboarding videos
    • Importing 3D assets from SketchUp
      • Setting up the SketchUp toolkit
      • Installing the Khronos glTF Exporter for SketchUp
      • Defining zone types in SketchUp
      • Importing assets from SketchUp
    • Working with Matrix Arrays
      • Creating arrays
      • Moving arrays
    • Working with zones
      • Defining zone types
      • Drawing zones
      • Moving zones
    • Working with presets
      • Creating a preset
      • Working with preset layers
      • Working with environmental conditions
    • Working with beams
      • Creating a Parametric Beam
        • Adjusting Parametric Beam parameters
      • Creating a Virtual Source
        • Adjusting Virtual Source parameters
      • Creating a Coverage Beam
        • Assigning zones to a Coverage Beam
        • Adjusting Coverage Beam parameters
        • Optimizing a Coverage Beam
        • Working with beam variants (advanced)
      • Creating an LF Coverage Beam
        • Creating crossovers
      • Routing Beams
    • Simulation
      • Simulation controls
      • Tuning
      • Probe Mode
      • Simulating with S21 arrays
    • Saving & exporting
      • Exporting to AFMG EASE
  • HOLOPLOT Control
    • Getting started
      • Accessing HOLOPLOT Control
      • Navigating the interface
    • Configuring the system
      • Setting up system essentials
      • Managing a project
      • Pairing Modules
      • Network Settings - RAVENNA only
      • Stream Management - RAVENNA only
      • Setting up Analog mode on X2 Modules
    • Operating the system
      • Getting an overview of the active project
      • Routing streams to audio inputs
      • Switching presets and environmental conditions
      • Applying actions to the system
      • Tuning beams
      • Monitoring level meters
    • Maintaining the system
      • Monitoring device health
      • Module driver test
      • Module and Controller events
      • Module and Controllers Issues List
  • HOLOPLOT API
    • Getting started
    • Documentation
      • Arrays and modules
      • Beams and presets
      • Device health
      • Controllers
      • System operation
      • Spaces
    • Examples
      • Changing a preset
      • Adjusting the system's gain
Powered by GitBook
LogoLogo

HOLOPLOT

  • HOLOPLOT Website
  • Contact
  • Imprint
  • Privacy Policy

© 2024 HOLOPLOT GmbH. All rights reserved.

On this page
  • Main EQ
  • Beam tuning

Was this helpful?

Export as PDF
  1. user guides
  2. HOLOPLOT system deployment

Align and tune beams

PreviousPairing the arrays & routing audioNextMeasurement and system optimization

Last updated 10 months ago

Was this helpful?

The Tuning section's Main EQ and Beam Tuning tabs allow for further sound personalization in real time and offer more control over low frequencies.

For more detailed information on how to use the Main EQ, go to the following section:

Main EQ

It includes 6 bands to adjust the EQ at a system level.

Beam tuning

The Beam tuning page allows you to adjust the EQ, gain, and delay of the beams for the currently selected preset and environmental conditions. The Beam Tuning tab is split into two panels:

1. Beam table – left panel

The table displays all the beams belonging to the active preset with the following information or actions:

  • Gain and delay values

  • Mute and Solo buttons

  • Signal indicator to verify whether there is a signal coming in

  • EQ button to activate or bypass the EQ when previously set

2. Beam EQ – right panel

This panel displays the EQ window for the selected beam on the left panel, featuring 8 bands. It also shows the beam input level meter and the connected arrays to monitor output levels.

A Beam's tuning is linked to the Preset Layer and environmental conditions. This means each Beam will have different Gain, Delay, and EQ values for each associated Preset Layer and Environmental Condition. Learn more in Working with preset layers and HOLOPLOT OS

Tuning beams
Tuning › Main EQ
Tuning › Beam Tuning